Status Indicator - IKEA SYMFONISK Betriebsanleitung

On/Off
Play/Pause

Status indicator

Volume up (+)
Volume down (-)
Ethernet port (5)
AC power (mains) input
(100 - 240 VAC, 50/60 Hz)
Sonos is designed to be always on; the system uses
minimal electricity whenever it is not playing music.
To stop streaming audio in one room, press the Play/
Pause button on the speaker.
Toggles between playing and pausing audio (restarts
the same music source unless a different source is
selected).
Press once to start or stop streaming audio
Press twice to skip to the next track (if applicable to
the selected music source)
Press three times to skip to the previous track (if
applicable to the selected music source)
Press and hold to add the music playing in another
room.
Indicates the current status. During normal operation
the white light is dimly lit. You can turn off the white
light from More -> Settings -> Room Settings.
See Status indicators for a complete list.
Press to adjust the volume up and down.
You can use an Ethernet cable (supplied) to connect
the SYMFONISK to a router, computer, or additional
network device such as a network- attached storage
(NAS) device.
Use only the supplied power cord to connect to a
power outlet (using a third-party power cord will void
your warranty).
Insert the power cord firmly into the SYMFONISK until
it is flush with the bottom of the unit.
7