IKEA SYMFONISK Betriebsanleitung Seite 14

Equalization settings
The SYMFONISK ships with the equalization settings preset to provide the optimal
playback experience. If desired, you can change the sound settings (bass, treble,
balance, or loudness) to suit your personal preferences.
Note: Balance is only adjustable when the SYMFONISK is used in a stereo pair.
1. On a mobile device, go to More -> Settings -> Room Settings.
2. Select a room.
3. Select EQ, and then drag your finger across the sliders to make adjustments.
4. To change the Loudness setting, touch On or Off. (The loudness setting boosts
certain frequencies, including bass, to improve the sound at low volume.)
I have a new router
If you purchase a new router or change your ISP (Internet service provider), you will
need to restart all your Sonos products after the router is installed.
Note: If the ISP technician connects a Sonos product to the new router, you only
need to restart your wireless Sonos products.
1. Disconnect the power cord from all of your Sonos products for at least 5 seconds.
2. Reconnect them one at a time, starting with the Sonos product that is connected to
your router (if one is usually connected).
Wait for your Sonos products to restart. The status indicator light will change to
solid white on each product when the restart is complete.
If your Sonos setup is completely wireless (you don't keep a Sonos
product connected to your router), you will also need to change your wireless network
password. Follow the steps below:
1. Temporarily connect one of your Sonos speakers to the new router with an
Ethernet cable.
2. Go to More -> Settings -> Advanced Settings -> Wireless Setup. Sonos will detect
your network.
3. Enter the password for your wireless network.
4. Once the password is accepted, unplug the speaker from your router and move it
back to its original location.
14