Do not use any abrasive, aggressive cleaners
or hard brushes to clean the product and its
accessories .
Cleaning the vacuum attachment 1 ,
wiper 4 and motor unit 9
Wipe down the parts with a slightly damp
cloth .
Do not let any water or other liquids enter
the product interior .
After cleaning: Let all parts dry completely .
Cleaning the water container 6 , dirt
water container 8 and suction head 12
Rinse the parts in water and/or mild
detergent .
After cleaning: Let all parts dry completely .
Cleaning the microfiber covers
The microfiber covers 3 can be cleaned in a
washing machine and in a dry cleaner .
Clean the microfiber covers 3 with a mild
setting, up to 60 °C .
After cleaning: Let the microfiber covers 3
dry completely .
Troubleshooting
Problem
Solution
The product is
Charge the product .
not working
Streaks keep
Remove the blade by
appearing
pulling it sideways from the
during
vacuum attachment 1 .
vacuuming
Moisten the blade on the
round end with water
and/or detergent . Pull
the blade back into the
vacuum attachment .
Use less detergent while
cleaning the window .
The spray of the
Refill the water
wiper 4 is not
container 6 .
working
Turn the spray nozzle 5
to SPRAY or STREAM .
Storage
Store the product in the original packaging
when it is not in use .
Store the product at a dry location out of the
reach of children .
Store the product with an emptied
water container 6 and dirt water
container 8 only .
GB
13