Werbung
Interfaces
KNX PL-Link
Wiring connections
Cable type
Wiring lengths for signals.
Ambient conditions and protection classification
Classification as per EN 60730:
Function of automatic control devices
Degree of contamination
Overvoltage category
Design type
Degree of protection of housing to EN 60529
Climatic ambient conditions:
Transport (packaged for transport) as per
EN 60721-3-2
Operation as per EN 60721-3-3
Mechanical ambient conditions:
Transport as per EN 60721-3-2
Operation as per EN 60721-3-3
Standards, directives and approvals
Product standard - Automatic electrical controls for
household and similar use
Product Standard - General requirements for Home and
Building Electronic Systems (HBES)
Electromagnetic compatibility – generic immunity
standard, Industrial environment
Electromagnetic compatibility – generic emission
standard, Domestic, commercial, light industry.
EU conformity (CE)
EAC compliance
RCM conformity
UL Approbation
Federal Communications Commission*
CSA and cUL
ICES-003
Environmental compatibility
10
Siemens
Building Technologies
Type: KNX TP1, galvanic isolation.
Baud rate: 9.6 kbps.
Short-circuit proof. Protection against faulty wiring at
max. AC 24 V.
TP-1 Twisted Pair
Min. 0.8 mm (AWG20)
Max. 1.0 mm (AWG18)
KNX PL-Link 80 m (262.5 ft) with internal bus power or
300 m (984.3 ft) with external power supply.
Type 1
2
III.
Device suited for use with equipment of safety classes I
and II.
IP20.
Class 2K3
Temperature -25...70 °C (-13... 158 °F)
Air humidity 5...95%.
Class 3K5
Temperature -5...50 °C (23... 122 °F)
Air humidity 5...95%.
Class 2M2.
Class 3M2.
IEC/UL/EN 60730-1 , part H.23 Emission and H.26
Immunity
EN 50491-5-1, EN 50491-5-2, EN 50491-5-3
EN 14175 part 6
Certified VAV system CET solution for laboratories and
clean rooms at pressure range or 100...1000 Pa.
Immunity IEC/EN 61000-6-2
Emission IEC/EN 61000-6-3
DoC Document number: A5W90001444
Eurasien compliance for all QMX3.P... variants
AS/NZS 61000-6-3 : 2012
DoC Document number: A5W90001445
UL 916 PAZX Energy Management Equipment,
http://database.ul.com
FCC CFR 47 Part 15 Subpart B Class B
C22.2 No. 205 Signal Equipment
CAN ICES-3 (B) / NMB-3 (B)
The product environmental declaration contains data on
environmentally compatible product design and
assessments (RoHS compliance, materials
composition, packaging, environmental benefit,
disposal).
Datasheet
A6V10959858_de
2020-07-30
Werbung
