Hama Pocket 2.0 Bedienungsanleitung Seite 9

3
The Bluetooth connection is established
An audible signal con rms the successful connection.
The status LED (7) ashes slowly white.
4
Automatic Bluetooth connection (after successful pairing)
• Ensure your Bluetooth-enabled device is switched on and that Bluetooth is activated.
• Ensure that the loudspeaker is within the Bluetooth range of max. 10 metres.
• Switch the loudspeaker on.
• After a successful automatic connection, the status LED (7) ashes slowly. An audible signal
con rms the successful connection.
Note - connection impaired
After the loudspeaker and device have been paired, a connection is established automatically. If
the Bluetooth connection is not established automatically, check the following:
• In your device's Bluetooth settings, check that Hama Pocket 2.0 is connected. If not, repeat
the steps listed under points 1 and 2.
• Check that your device and the loudspeaker are less than 10 metres apart. If not, move them
closer together.
• Check whether obstacles are impairing the range. If so, move the devices closer together.
white