Layout And Items Supplied; Proper Use; Technical Data - EINHELL 9-13 Originalbetriebsanleitung

hout a safety screen (2) since otherwise the
optical unit may be damaged.
•
Protect the optical unit (13) and safety screen
(2) from dirt.
•
Replace the safety screen (2) promptly to
ensure that you can see through it easily so
that you do not suffer excessive fatigue when
using it.
•
Parts of the solar cell (3) or sensors on the
optical unit (13) must not be covered.

2. Layout and items supplied

2.1 Layout (Fig. 1)
1. Viewing window
2. Safety screen
3. Solar cell
4. Safety level controller
5. Locking button
6. Housing
7. Rear head band
8. Top head band
9. Locking button for rear headband
10. Front headband
11. Sensitivity setting wheel
12. Delay time setting wheel
13. Optical unit
2.2 Items supplied
Please check that the article is complete as
specifi ed in the scope of delivery. If parts are
missing, please contact our service center or the
sales outlet where you made your purchase at
the latest within 5 working days after purchasing
the product and upon presentation of a valid bill
of purchase. Also, refer to the warranty table in
the service information at the end of the operating
instructions.
•
Open the packaging and take out the equip-
ment with care.
•
Remove the packaging material and any
packaging and/or transportation braces (if
available).
•
Check to see if all items are supplied.
•
Inspect the equipment and accessories for
transport damage.
•
If possible, please keep the packaging until
the end of the guarantee period.
Anl_Automatik_Schweissschirm_9_13_SPK9.indb 18 Anl_Automatik_Schweissschirm_9_13_SPK9.indb 18
GB
Danger!
The equipment and packaging material are
not toys. Do not let children play with plastic
bags, foils or small parts. There is a danger of
swallowing or suff ocating!
•
Automatic welding screen
•
Spare safety screen
•
Original operating instructions

3. Proper use

The automatic welding protection fi lter with manu-
ally adjustable safety level is designed to protect
the eyes from the arc created by the following wel-
ding methods: Welding with encased electrodes,
MIG/MAG welding, TIG welding, arc-air gouging,
plasma fusion cutting and micro plasma welding.
Important.
The automatic welding screen is not designed for
laser welding.
The equipment is to be used only for its prescri-
bed purpose. Any other use is deemed to be a
case of misuse. The user / operator and not the
manufacturer will be liable for any damage or inju-
ries of any kind caused as a result of this.
Please note that our equipment has not been de-
signed for use in commercial, trade or industrial
applications. Our warranty will be voided if the
machine is used in commercial, trade or industrial
businesses or for equivalent purposes.

4. Technical data

Automatic welding protection fi lter with safety le-
vel adjustable by hand
Test number: ..........4/9-13 Einhell 1/2/1/1/379 CE
Bright level: ..................................... Safety level 4
Dark level (see Table 10.1): ..................................
............................. Safety level 9 – 13 (adjustable)
Bright to dark switching time: .................1/30000s
Activation sensitivity: ............. infi nitely adjustable
Dark to bright switching time ...............................
(infi nitely adjustable): ...........................................
................................. 0.25 – 0.35s ("short" setting)
...................................... 0.5 – 0.8s ("long" setting)
Optical class: ..................................................... 1
- 18 -
19.08.2019 08:27:08 19.08.2019 08:27:08