Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Operation
ON/OFF switch and the safety switch.
After 1 or 2 threads the cutting head
will cut along automatically.
During cutting, regularly apply more
cutting
compound.
The
required
length of the conical threads is
reached, when end of the tube
reaches the end of the cutting dies
(not the housing). When the threads
are completed, release the ON/OFF
switch.
After
the
machine
has
stopped, set the rotating direction
switch to reverse unscrew the cutter
from the threads by pressing the
ON/OFF switch.
Operate
the
rotating
direction
switch only when the machine is at
a complete standstill!
6
Werbung
