Herunterladen Inhalt Inhalt Diese Seite drucken

Proper Use; Technical Data - EINHELL BG-EL 2300 Originalbetriebsanleitung

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 1
Anleitung_BG_EL_2300_2500_1E_SPK7:_
GB
and blow the foreign objects safely away from
them.
Maintenance and storage
b
Check that all nuts, bolts and screws are
securely tightened in order to be sure that the
machine is in a safe working condition.
b
Frequently check the debris bag for signs of
wear and deformation.
b
Use only genuine accessories and spare parts.
b
For your own safety, replace worn or damaged
parts without delay.
b
Electric tools should be kept in a dry place when
not in use.
b
If the mains cable for this device is damaged, it
must be replaced by the manufacturer or its
after-sales service or similarly trained personnel
to avoid danger.
The tool can be plugged into any socket-outlet (with
230 V AC) that is equipped with a 10A fuse or higher.
The socket-outlet has to be safeguarded by an earth-
leakage circuit breaker (e.l.c.b.). The operating
current must not exceed 30 mA.
CAUTION!
Read all safety regulations and instructions.
Any errors made in following the safety regulations
and instructions may result in an electric shock, fire
and/or serious injury.
Keep all safety regulations and instructions in a
safe place for future use.
Explanation of the warning signs on the
equipment (see Fig. 8)
1. Read the directions for use before operating the
tool.
2. Do not use the tool in rain or snow. Do not ex-
pose the tool to wet conditions.
3. Keep all other persons away from the danger
zone.
4. Wear goggles and ear muffs.
5. Switch off the tool and pull out the power plug be-
fore carrying out any cleaning or maintenance
work.
6. Rotating parts. Keep your hands and feet away
from all openings.
12
15.01.2010
8:33 Uhr
Seite 12
2. Layout (Fig. 1/1a)
1. Front suction tube
2. Rear suction tube
3. Handle
4. Carrying strap
5. ON/OFF switch
6. Power cord
7. Debris bag
8. Selector switch for vacuum/blower
9. Guide roller
10. Screws for suction tube assembly
11. Speed controller (only on the BG-EL 2500/1 E)

3. Proper use

The garden blower vac is designed to handle only
foliage and garden refuse such as grass and small
branches. Any other use is prohibited.
The equipment is to be used only for its prescribed
purpose. Any other use is deemed to be a case of
misuse. The user / operator and not the
manufacturer will be liable for any damage or injuries
of any kind caused as a result of this.
Please note that our equipment has not been
designed for use in commercial, trade or industrial
applications. Our warranty will be voided if the
machine is used in commercial, trade or industrial
businesses or for equivalent purposes.

4. Technical data

AC motor
Output BG-EL 2100
no load speed n
BG-EL 2300
0
BG-EL 2500/1 E 7000-15000 min
Protection class
Air velocity
Suction rate
Volume of debris bag
Sound volume level L
Sound pressure level L
Vibration a
hv
Weight
230V ~ / 50 Hz
2300 watts (BG-EL 2300)
2500 watts (BG-EL 2500/1 E)
15000 min
-1
-1
II / ®
240 km/h
780 m
3
/h
approx. 40 l
105 dB (A)
WAd
85 dB (A)
pAd
4.77 m/s
2
4.2 kg

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

Bg-el 2500/1e34.331.8034.331.90

Inhaltsverzeichnis