Product Description - Siemens DTI Betriebsanleitung

11.2006
2
NOTE
NOTE
Siemens AG
SIMOVERT MASTERDRIVES
Downloaded from www.Manualslib.com

Product Description

Digital tachometers with different voltage levels can be connected to
the "digital tachometer interface" (DTI). The inputs are electrically
isolated (floating).
♦ HTL tachometers (high-voltage transistor logic, 11 V to 30 V)
♦ TTL- tachometers (transistor- transistor logic, 5 V)
An additional 24 V DC power supply is required for the board.
♦ 0.3 A power supply module (option)
The current drain is a function of the encoder type.
DTI board inputs and outputs
Terminal strip
Input
Output
24 V ext
Only one of the two input terminal strips -X401 or -X402, may be used.
Table 2-1
1)
only with 6SE7090-0XX84-3DB1
6SE7087-6CX84-3DB0
Digital tacho-Interface
manuals search engine
Description
-X401 TTL
-X402 HTL
-X403 to the CUVC / CUVP
or
to the "tachometer and synchronization board" (TSY)
-X405 TTL output
-X404 Infeed on the installation side
DTI inputs and outputs
Product Description
1)
/ CU2 control board
2-1