Sony PCGA-BM1 Bedienungsanleitung Seite 17

Switch number
Switch 1
(Setup/normal operation mode
selector)
Factory default setting: OFF
Switch 2
Factory default setting: OFF
Switch 3
(Private ON/OFF selector)
Factory default setting: ON
3
When the switch settings have been made, reattach the
base.
The settings become active the next time power is turned on.
Setting
In normal dial-up communications and when
performing notebook bonding (page 19), this switch
must be OFF. Set the switch to ON only in the
following cases:
• When changing the Passkey (page 25)
• When deleting unnecessary bonding information
(page 27)
• When changing the device name (page 29)
Always set to OFF in Europe.
In normal operation, this switch must be ON. When
performing notebook bonding (page 19) or when using
the modem station utility to change the settings of the
unit (page 24), set the switch to OFF.
When this switch is set to OFF, the presence of the
unit can be detected by other Bluetooth compatible
devices. If users of such devices know the Passkey,
Bluetooth bonding is possible.
GB
17