Power connection
Use the supplied AC adapter to power the PCGA-BM1.
The unit comes with two different AC cables. Choose the correct AC cable
for the country where the PCGA-BM1 is used.
Note
Plug in the DC cable from the AC adapter only after the telephone line connection has
been established.
1
Insert the plug of the AC adapter into the mains.
2
Insert the plug of the DC cable from the AC adapter into the
DC IN connector on the PCGA-BM1.
Connect to mains
When using the unit in a European
country other than the UK
Connect to mains
When using the unit in the UK
Connect to mains
Attaching or removing the base
The PCGA-BM1 comes with a base which should be attached in normal
use. To change a DIP switch setting or to plug in or unplug the telephone
line, the base must be removed.
AC Adapter (supplied)
Adapter for continental Europe
Adapter for UK
DC IN 6V
DC IN
connector
Continued on next page
GB
13