Shelf Glass; Precaution; Screws (M4 X 8) - Pioneer PDK-FS01E Bedienungsanleitung

[Attaching the cable covers]
¶ Attach the cable covers to the column (2 locations).
¶ The cable cover is magnetically attached so that its
position can be changed according to the way the cables
come out.

Precaution

¶ Use the large cable cover above the shelf glass and the
small cable cover under the shelf glass.
¶ The storage space cannot be completely covered,
because the cable cover is set so that the cables pass
through when it is installed.
8
Insert the shelf glass into the glass stays.

Shelf glass

Precaution
¶ Install it with the caution label facing upwards.
6
9
Cable cover (large)
Cable cover
(small)
10
11
Caution
label
¶ Install the equipment on the shelf glass and ornamental
¶ Maximum load of the shelf grass and ornamental base is
Fix it with the screws (M4). (2 locations: left
and right)
Precaution
¶ Be sure to fix it with screws.
If the shelf glass is not fixed, it might overturn if
someone accidentally touches it.
Place the ornamental base on the base.
Installing and wiring the equipment.
base and wire it.
20kg. Be sure to install equipment so that the load does
not exceed 20kg.
Precaution
¶ If a video deck is installed on top of the shelf glass, on
rare occasions, picture noise will be generated under
specified conditions such as the angle of the plasma
display. If this happens, install the video deck on top of
the ornamental base.
Column
The customer's plus
(+) screw driver
Base
Ornamental
base