Cable Clamps - Pioneer PDK-FS01E Bedienungsanleitung

5
Attach the plasma display to the column.
Attach it by
aligning it with
shaft of the
column.
Precaution
¶ Be sure to have two or more people perform the
attachment.
¶ Be extremely careful not to jam your figures while
doing this task.
Attach the washer and bolt M8 to the shaft of
6
the column.
Precaution
¶ Be sure to attach the washer and bolt M8 to do this
step for safety.
7
Pass the cable through the columns.
[Anchoring the system cables]
House the cables inside the column as shown below.
Precaution
¶ Be extremely careful that the cable is not stretched and
that it is not partly jammed in the floor stand when the
plasma display is moved to the left or right (max. 30°).
[Passing the power cord (plasma display, media
receiver) through the hole]
Pass the cables through the hole in the column as shown
below.
[Attaching the cable clamp]
Washer
The extra cables can be bundled and anchored with the
cable clamp as shown below.
Cable clamp
Use the holes on the back of the base (4 holes) according to
circumstances.
5