Cleaning - Silvercrest IAN 113854 Bedienungsanleitung

Setting-up operation / Cleaning
Prob-
No indicator light
lem
on remote control
when pressing "ON"
or "OFF"
Rem- · Check if the batteries are
edy inserted correctly.
· Check if the batteries
have proper contact with
the springs, if necessary
adjust.
Prob- No reaction from
lem consumer
· Check that the appliance
Rem-
edy is switched on.
· Assign new code to the
remote control socket (see
„preparing the remote
control socket", point 4).
· Check - by walking closer
to it - that the range is
correct for the desired
location.
18 GB
113854_silv_Funksteckdosen-Set_Content_DE_AT.indd 18
Prob- Range is too small
1
lem
Rem- · For large ranges, ensure
edy
· If the range is too small

Cleaning

Q
J
Ensure that no liquids get into the
inside of the device. Use a soft cloth
to clean the housing. Never use
petroleum, solvents or cleaners
which corrode plastics.
j
Before cleaning, always disconnect
the radio-controlled socket from the
wall socket and remove all power
plugs from the device.
that as few walls and as
little furniture as possible
are in the way of the
remote control and the
radio-controlled socket.
at times, the reason could
be a remote control which
works on a similar frequen-
cy. Whenever this remote
control is active, the range
declines (e.g. wireless
headphones, radio-con-
trolled movement alarms,
radio gongs etc.).
17.06.15 10:24