Before Turning On The Power; Bundling The Cables - Pioneer krl-46v Bedienungsanleitung

Quick guide

Before turning on the power

Standard DIN45325
plug (IEC 169-2)
75 q coaxial cable
Supplying power to the aerial
You must supply power to the aerial in order to
receive digitally/terrestrially broadcast stations after
connecting the aerial cable to the ANT terminal on
the rear of the TV.
1� Press h and the "HOME MENU" screen displays.
2� Press a/b to select "Setup".
3� Press a/b to select "Antenna Setup-DIGITAL", and
then press enter.
4� Press a/b to select "Supply Voltage", and then press
enter.
5� Press c/d to select "On", and then press enter.

Bundling the cables

Cable clamp
Bundle the cables with

the clamp.
1�
Carefully insert the
CA Module in the
Common Interface
slot with the contact
side forward.
2� The logo on the CA
Module must be
facing forward from
the rear of the TV.
Ferrite Core*
(For Europe, except
AC cord
(For U.K. and Eire)
* Ferrite Core
The Ferrite Core should be permanently attached
and never removed from the AC cord.
Place the TV close to the
AC outlet, and keep the
power plug within reach.
U.K. and Eire)