Description; Noise Emission; Vibration Response - Siemens 1FW3 Ergänzungen Zur Betriebsanleitung

Description

2.1

Noise emission

Hearing damage
Hearing damage may occur if the motor exceeds a sound pressure level of 70 dB (A) due
to the type of mounting or pulse frequency.
• Reduce the sound pressure level by implementing sound damping and/or soundproofing
2.2

Vibration response

"Condition-monitoring-ready" option
With the option "condition-monitoring-ready", you can monitor the drive components at any
time via vibration signals to avoid unexpected plant downtimes. A change in the vibration
response is an early indication of imminent damage.
Condition-monitoring-ready motors are equipped with boreholes for inserting vibration
sensors. This allows you to position vibration sensors optimally and install condition
monitoring systems.
You can find further information about the Siemens condition monitoring system by following
this link:
SIPLUS CMS
requirements/siplus-cms.html?_sm_au_=iVV514PkqnSJ0nfft2tQvK032Hv7C)
Motors with option G50
On motors with option G50, you can, for example, monitor the vibration severity at the ball
bearing using sensors. You can find out how to mount the sensors in chapter "Mounting
(Page 9)".
Supplement to "1FW3 complete torque motors" operating instructions
Operating Instructions, 03/2020
WARNING
measures.
(https://new.siemens.com/global/en/products/automation/products-for-specific-
2
7