Rectifying Errors - Bosch GRL 600 CHV Professional Originalbetriebsanleitung

50 | English
Function
Rotation, line and point operation
Turning the line/point within the rotational plane
Turning the rotational plane when in the vertical position
Automatic downwards plumb point function in the vertical
position
Centre line mode
Partial projection
Shock-warning function
Slope operation
Manual operation
X-axis and Y-axis calibration (horizontal position)
Z-axis calibration (vertical position)
A) The function must be started on both the measuring tool and the remote control, laser receiver or smart phone at the same time.
B) The function must be started on both the measuring tool and the smartphone at the same time or on the laser receiver.

Rectifying errors

Rotary laser display Laser re-
indicator ceiver dis-
play indic-
ator
−
−
−/PNK
−
−
−
−
1 609 92A 55C | (05.11.2019)
GRL 600 CHV
●
●
●
−
−
−
●
●
●
B)
●
●
Problem Corrective measure
automatic shut-down Change the rechargeable or non-rechargeable battery as
(empty rechargeable/non- necessary.
rechargeable battery)
automatic shut-down (oper- Adjust the measuring tool to the ambient temperature be-
ating temperature ex- fore switching it on. Then check the measuring accuracy
ceeded) and calibrate the measuring tool if required.
Unsuccessful attempt to Briefly press the on/off button (11) to close the error
connect to the remote con-
message. Restart the process of establishing the connec-
trol (41) or the laser re- tion (see "Establishing a connection to the remote con-
ceiver (42) trol/laser receiver", page 39).
If it is not possible to establish a connection, please con-
tact a Bosch customer service agent.
Unsuccessful attempt to Briefly press the on/off button (11) to close the error
connect to the mobile message. Start the connection process again (see "Re-
device mote control via Bosch Levelling Remote App",
page 40).
If it is not possible to establish a connection, please con-
tact a Bosch customer service agent.
Measuring tool is at a slant Reposition the measuring tool so that it is in either the ho-
of more than 8.5% or is not rizontal or vertical position. The re-levelling will start
in the correct horizontal or automatically.
vertical position.
Maximum levelling time is Reposition the measuring tool so that it is in either the ho-
exceeded rizontal or vertical position. Briefly press the on/off but-
ton (11) to restart levelling.
Change between the hori- Briefly press the on/off button (11) to restart levelling.
zontal and vertical position
RC 6 LR 60 Bosch Levelling
Remote App
● − ●
● − ●
● − ●
● − ●
− ● −
− − ●
− − ●
● − ●
− − ●
− ● ●
− − ●
Bosch Power Tools