En - Quick Start-Up Guide - ABB ACQ580 Kurzanleitung Für Die Inbetriebnahme

ACQ580 QSG.book Page 3 Wednesday, July 26, 2017 3:17 PM
EN – Quick start-up guide
EN – Quick start-up guide
This guide describes how to start-up the drive using the First start assistant on the
Hand-Off-Auto control panel.
This guide describes how to start-up the drive using the First start assistant on the
For complete information on start-up, see ACQ580 firmware manual (3AXD50000035867
Hand-Off-Auto control panel. For complete information on start-up, see ACQ580
[English]).
firmware manual (3AXD50000035867 [English]).
Safety
Start-up with the First start assistant on a Hand-Off-Auto
control panel
Make sure that the installation work is complete. Make sure that cover of the drive and the cable box, if
included, are on place.
Check that the starting of the motor does not cause any danger. De-couple the driven machine
Make sure that the installation work is complete. Make sure that cover of the drive and the
if there is a risk of damage in case of an incorrect direction of rotation.
cable box/conduit box, if included, are on place.
Check that the starting of the motor does not cause any danger. De-couple the
driven machine if there is a risk of damage in case of an incorrect direction of
rotation.
Using the Hand-Off-Auto control panel
Hints on using the assistant control panel
The two commands at the bottom of the display
The two commands at the bottom of the display (Options
(Options and Menu in the figure on the right),
and Menu in the figure on the right), show the functions of
show the functions of the two softkeys
the two softkeys
located below the display. The commands
The commands assigned to the softkeys vary depending on
assigned to the softkeys vary depending on the
the context.
context.
Use keys , ,
Use keys ,
change values depending on the active view.
and/or change values depending on the active
view.
Key shows a context-sensitive help page.
Key ? shows a context-sensitive help page.
For more information, see ACS-AP-x assistant control panels
user's manual (3AUA0000085685 [Englisch]).
Language, date and time, and motor nominal values
Have the motor or pump name plate data at hand.
Power up the drive.
The First start assistant guides you through the
first start-up.
The assistant begins automatically. Wait until the
control panel enters the view shown on the right.
Select the language you want to use by
highlighting it (if not already highlighted) and
pressing (OK).
Note: After you have selected the language, it
takes a few minutes to download the language
from the drive to the control panel.
Safety
and located below the display.
and to move the cursor and/or
, and to move the cursor
1 – First start assistant guided settings:
EN – Quick start-up guide 3
EN – Quick start-up guide 3
and
R0-
R4
EN
CS
EN
DE
DE
ES
ES
FI
FR
FR
IT
IT
RU
PT
SV
RU
SV
TR