Assembly - Westfalia 31 07 14 Bedienungsanleitung

Assembly and Using
In the interest of continuous improvement of our products, technical
specifications are subject to alteration without prior notice.

Assembly

The saw blade sharpener is
delivered partly assembled to
ensure damage-free shipping.
Mount the stop bracket (4) on the
base element (39). Screw a 6x30
mm Allen screw (27) on the stop
bracket (4) and fix the screw with
the M6 nut (41). Screw the stop
bracket (4) with two M6 screws (16).
Mount the drilling machine handle (2)
and the safety hood (9). Fix the drilling
machine handle (2) with the flat-head
screw (24) und the nut (19).
Screw on the opening of the drilling
machine handle the 6x20 mm Allen
screw (28) and tighten the screw with a
M6 nut (41).
Attach the safety hood (9). Insert the
retaining bar (22) with the thread through
the hole. Place a washer (31), the small
tooth lock washer (26) on the retaining
bar and tighten with the nut M6 (41).
Slide the retaining bar (22) into the
drilling machine handle and tighten the
retaining rod with the wing screw (10)
and a M6 nut (41).
10