Using
1. Remove the protective cover (1) from the clipper.
2. Press and hold the on/off switch (3) and slide it forwards
to power on the clipper.
3. Hold the clipper with one hand and lead it to your
fingernail so that the alignment of the cutter head (7)
leads parallel to the fingernail.
4. Move the cutter head evenly, slowly and with little
pressure alongside the fingernail. Lead the cutter head
in semi-circle movements around the fingernail to cut
and polish the nail. The cutting result depends on the
speed, intensity and duration of the treatment.
5. Push the on/off switch back to switch off the device.
6. After each use, put the protective cover back on the
cutter head.
Operating
11