Grundig GDK 6470 X Bedienungsanleitung Seite 33

Cleaning and Maintenance
The surface may be damaged due to abrasive
or rubbing cleaning agents. Never use abrasive
and rubbing cleaning agents. Acquire the clean-
ing agents and protective materials suitable for
your appliance form your authorised service.
The surface of the appliance and the controllers
are sensitive to scratching.
• Clean the surfaces with a soft and damp cloth,
dishwashing liquid or a soft glass cleaning
agent. Soften the dried and adhered dirt with
a damp cloth. Do not scratch out!
• Dry cloths, sponges that may scratch,
materials that require rubbing, sand and the
other effective cleaning agents containing
mineral water, acid or chloride are not suitable.
• Clean the stainless steel surfaces only in the
direction of grinding.
• Do not use stainless steel cleaning agent
or wet cloths for control units. Cleaning the
metal oil filters. Used metallic oil filters hold
the humidity generated in the kitchen and
the oily particles contained within the steam.
In case of regular use (1 to 2 hours per day),
clean the metal oil filters about every month.
• Do not use over-effective, acidified or
corrosive cleaning agents.
• For the cleaning of the metal oil filters, use a
damp cloth to clean holding parts of metal oil
filters inside the appliance.
• You can clean the metal oil filters in the
dishwasher or by hand.
• Do not apply spray cleaning agents directly on
the appliance.
Washing in the Dishwasher
• In case of washing in the dishwasher, slight
discoloration may occur. This does not affect
the function of the metal oil filter.
• Do not wash heavily soiled metal oil filters to-
gether with the dishes.
• Place the metal oil filters in the dishwasher
loosely or freely. Metal oil filters should be
placed in the dishwasher without being
32
jammed.
Washing By Hand
• You can use a special oil dissolving agent for
stubborn dirt. You can get this agent from the
authorised sales center.
• Soften the metal oil filter in hot water contain-
ing dishwashing liquid.
• Use a brush for cleaning and wait for the liquid
on the metal oil filter to be drained well. Rinse
the filters well after cleaning.
• Technical specifications and this manual may
be changed without prior notice.
• This appliance complies with the Regulation
for Supervision of the Waste Electric and Elec-
tronic Equipment.
• This hood is designed to be used over the hob.
Make sure that the wall can bear the weight
of the hood. Cost of crushing, cutting and
similar procedures to be carried out on the
wall or cabinet during installation should be
covered by the consumer. The hood may be
used with a flue system that discharges the
air, or without a flue (by attaching the carbon
filter). Pay attention to the matters that may
be encountered before or during the installa-
tion. Installation should be performed by the
authorised service agent. Installation should
be carried out by an authorised specialist
who has knowledge of ventilation. Service life
of the appliance identified by the Ministry of
Industry (period of availability for the spare
parts required for the performance of func-
tions of the appliance) is 10 (ten) years.
• Your appliance must be kept in its original
packaging to avoid damage to its components
during handling and transportation.
• Keep the appliance in its normal position
during handling.
• Do not drop the appliance and protect it
against damage during transportation.
Warranty does not cover the faults and
damages occurred during transportation after
delivery of the appliance to the customer.