Herunterladen Inhalt Inhalt Diese Seite drucken

Key Functions; Using The Appliance - Grundig GDK 6470 X Bedienungsanleitung

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 1
Installation and Use of the Appliance
The device mounting accessories include two
hood flaps. Attach these flue flaps to the mo-
tor exhaust as seen below.
Insert the plastic pin (Figure 10) on the pin
socket on the motor exhaust (Figure 10). Then
bend the flap lightly to insert the other pin on
the flap and insert the other pin to its socket
(Figure 10).
Inner Flue use (1) screw to (2) pull upper¬left
and screw onto the flue connection plate (3)
from left and right. Affix with two screws (4)
the outer flue to the left and right connection
plates at the back of the cooker hood's body,
from¬the bottom.

Using the Appliance

1. Lamp On/Off Button
2. 1. Level Button
3. 2. Level Button
4. 3. Level Button
5. Boost Button

Key Functions

1. Lamp On/Off Button: You can illuminate the
cooking area by pressing this button.
2. The hood operates in 1st speed level by
pressing this button. Press this button
again to switch off the appliance.
3. The hood operates in 2nd speed level
by pressing this button. (Shown on the
display) The display and hood turn off
when you press this button again to switch
off the appliance.
4. The hood operates in 3rd speed level by
pressing this button. (Shown on the
display) The display and hood turn off
when you press this button again to switch
off the appliance.
5. High Level Button: When the appliance is
switched to high level in use, the high
level light indicator will blink. This indicates
that the high level ventilation mode is
active. Appliance will operate 7 minutes
in this mode and will switch to one lower
level after 7 minutes and will continue to
operate at the switched mode.
Automatic Stop 15 mins.
• The appliance has an automatic stop feature
to eliminate the odour, to discharge the
steam after cooking is complete, and to have
the appliance stopped automatically while
ventilating the environment for a while.
• To enable the automatic stop function, press
and hold any of the speed
• level buttons (2, 3 or 4) on the control panel
for more than 2 seconds. The 15-minute timer
will then be enabled.
• Automatic stop feature will be deactivated and
the motor of the appliance will stop when you
press the same button corresponding to the
speed level while the automatic stop feature
is active. This feature will be deactivated
when you switch to different speed levels. If
you want the appliance to stop automatically,
DE
EN
FR
PL
RO
BG
EL
29

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis