Electrical Connection - Electrolux WS 210 Benutzerinformation

Installation instructions

Electrical Connection

Electrical installation must be performed
by an electrician qualified in accordance
with the legislation in force.
Before connecting the crockery warmer to
the electric mains, check that the voltage
and frequency of the mains matches that
which is shown on the rating plate located
in the heating block inside.
The electric connection is made via an
omnipolar switch, which is suitable for the
intensity to be tolerated and which has a
minimum gap
contacts, which will ensure disconnection
in case of emergency or when
cleaning the crockery warmer. If a plug is
used for the electric connection, then it
must be accessible after installation.
of 3mm between
The connection should include correct
earthing, in
norms. WARNING: THE CROCKERY
WARMER MUST BE EARTHED.
If the flexible supply cable fitted to the
crockery warmer ever needs to be
changed, it should be replaced by an
official After Sales Service, because it
requires special tools.
The manufacturer and retailers do not
accept responsibility for any damage
that may be caused to people, animals or
its
property if these installation instructions
are not observed.
electrolux 43
compliance with current