ABB 6972 AG-102-500 Betriebsanleitung Seite 41

Fields of Application/Functioning GB
The ABB Powernet EIB device system is configured similarly to that of the ABB
®
i-bus EIB, however, signal transmission is via the 230 V supply system instead
of the 2-core bus line.
Function as a shutter actuator
The actuator 6972 AG-102-500 permits the simultaneous control of two shutter
motors. Shuttters can also be raised and lowered and the lamellas adjusted via
conventional shutter pushbuttons (e. g., 2020/4 US). Separate locking (emergency
UP position in the case of high winds) is possible, e. g., via the ABB wind sensor.
Function as a series actuator
The actuator 6972 AG-102-500 can switch two consumer groups independent of
each other (see also "Technical Data").
Additional functions can be parameterized via the ETS or Power-Project:
- adjustable staircase lighting function
- logic operations (AND/OR)
- adjustable delays
NOTES
Device selection (shutter or series actuator) is effected via the software.
Local operation is possible via conventional pushbuttons.