Sony HVBK-1520 Installationsanleitung Seite 35

5 Remove the backing from the double-sided tape that is affixed to the
graphite sheet.
6 Align the edge of the graphite sheet to the edge A of the heat
conducting sheet, with the double-sided tape side of the graphite
sheet (1) down, and affix the graphite sheet to the heat conducting
sheet (2).
7 Align the edge of the graphite sheet to the edge of the bracket A of
the DPR board, and affix the graphite sheet to the bracket of the DPR
board (1).
When you do this, align the screw holes on the graphite sheet to the
screw holes of the DPR board.
Graphite sheet
1
2
A
Heat conducting sheet
1
A
Installation 35