Sony HVBK-1520 Installationsanleitung Seite 34

34 Installation
4
Mount this board on the SDI (for HVR-1500) or DPR board.
For the DPR board
To mount this board on the DPR board of the HVR-1500A, you must
install the graphite sheet (steps 5 to qa).
CN-2905 board
1 Remove the two screws, and remove the CN-2905 board.
2 Attach the supplied hexagonal pillar, using the supplied screw
(+PSW 2×5) from the underside of the motherboard.
3 Mount this board in the position from which you removed the
CN-2905 board in step 1, so that the connectors on the underside of
this board engage with the connectors on the DPR board.
4 Fix this board with the three supplied screws (+PSW 2×5).
If you are using the HVR-1500, proceed to step 5.
DPR board
This board
Hexagonal pillar