HP p550 Schnelleinstieg Seite 3

Configuring Basic Settings the First Time You Power On the
Camera
The first time you load a battery into the camera, a screen appears for configuring the
display language, date, and time settings. Failure to set the date and time correctly
will cause the wrong date and time data to be recorded with SKRWRs.
>
1.
Press [ON/OFF] (Power) to turn on the
camera.
2.
Use [ ], [ ], [ ], and [ ] to select the
language you want and then press
[SET].
3.
Use [ ] and [ ] to select a date format and then press [SET].
4.
Set the date and the time.
Use [ ] and [ ] to select the setting you want to
change and then use [ ] and [ ] to change it.
To switch between 12-hour and 24-hour format, press
[ ] (Movie).
5.
After setting the date and time, use [ ] and [ ]
to select "Apply" and then press [SET].
> @ 9LGHR 
2
[ON/OFF] (Power)
SET