Troubleshooting; Malfunction Causes And Remedies; Possible Cause - Parkside PAS 500 C2 Bedienungsanleitung

Troubleshooting

GB
IE
CY

Malfunction causes and remedies

Defect
The appliance
will not switch
on
Low or lack
of suction
12
In this chapter you will receive important information for malfunction localisation
and remedies.
WARNING
Pay heed to the following safety information to avoid risks and property
damage:
► Repairs to electrical appliances may only be carried out by specialists who
have been trained by the manufacturer. Considerable risk for the consumer
and damage to the appliance can occur as a result of incompetent repairs.
The following table will help with localising and remedying minor malfunctions:

Possible cause

The plug is not connected.
The mains power socket is not
providing power
Safety stop due to missing or
incorrectly inserted HEPA fi lter
or wire fi lter basket
6
On/Off switch
Motor defective
Suction hose 11 or suction
pipe blocked
12
Metal container
10
Metal container
10
HEPA-Filter 13 is blocked
Air fi lter 15 is blocked
NOTICE
► If you cannot solve the problem with the aforementioned methods please
contact customer service.
Solution
Insert the plug into the mains
power socket.
Check the house fuses
Fit the HEPA-Filter
13
fi lter basket
14
defective
Repair by Customer Services
Remove obstructions and blockages
is not closed Close the metal container
is full Empty the metal container
Clean or replace the HEPA-Filter
Clean the air fi lter
13 and/or wire
14 correctly
10
10
13
15
PAS 500 C2