Bosch Dinion XF LTC 0610 Serie Installationshandbuch Seite 21

Dinion XF | Installation Manual
BLUE gain -5 - 0 - +5
RED -50 - 0 - +50
GREEN
BLUE
SAT -15, ... 0, ... +15
EXIT
Back Light Compensation (BLC) submenu
Function Selection
BLC ON, OFF
BLC LVL -15,..0,..+15
AREA Select submenu
EXIT
Selecting an area
To set-up an area for BLC (or VMD), access the area menu by selecting the
AREA option from the BLC (or VMD) menu. Upon entering the AREA
menu, the current area is displayed with the upper left corner flashing. The
flashing corner of the image can be moved with the Up, Down, Left, Right
arrow keys. Pressing the Select key moves the flashing cursor to the
opposite corner, which can now be moved. Pressing Select again freezes
the area and exits the area menu.
Video Motion Detection (VMD) submenu
Function Selection
VMD OFF, SIL, OSD
Bosch Security Systems | 2003-10 | V0.5
• ATW mode and AWB hold mode: adjusts the B
gain to optimize around the white point.
Controls all the colors individually for manual
white balance only.
Adjusts the color saturation. -15 will lead to a
monochrome image
Return to MODE menu
Description
When ON, the video level is optimized for the
selected area of the image. Parts outside this area
may be underexposed or overexposed (this is
normal).
BLC LEVEL adjust the balance between the
selected BLC area and its surrounding.
Select to access the Back Light Compensation
area menu (see selecting an area).
Return to MODE menu
Description
When VMD is enabled and the camera can
generate SIL (silent) or OSD (monitor alarm
generates on-screen message) motion alarms.
EN | 21