Bosch Dinion XF LTC 0610 Serie Installationshandbuch Seite 20

Dinion XF | Installation Manual
Note
If SENS UP or NIGHTSENSE is active, some noise or spots may appear in
the picture. This is normal camera behavior. SENS UP may cause some
motion blur on moving objects.
If GAIN is set to FIXED, NIGHTSENSE will not become active.
If NIGHTSENSE is active, all color related menu items are disabled and
cannot be accessed.
Enhance submenu
Function Selection
AUTO ON, OFF
BLACK
BLK LEVEL -50, ... 0, ...+50
CONTOUR -15 - 0 - +15
DNR AUTO, OFF
XF-DYN OFF, LOW, MID,
HIGH
EXIT
Color submenu
Function Selection
WHITE ATW, MANUAL,
BALANCE AWB HOLD
WB SPEED Slow, Medium, Fast
RED gain -5 - 0 - +5
Bosch Security Systems | 2003-10 | V0.5
Description
Autoblack ON automatically increases the
visibility of details
Adjusts the black level between 0 and approx
110mV. Zero position of slider corresponds to the
factory default black level
Adjusts the sharpness of the picture. 0
corresponds to the default position.
In AUTO mode the camera automatically reduces
the noise in picture. This may cause some motion
blur on moving objects.
In XF-DYN mode the camera automatically
optimizes the contrast in the picture.
Return to MODE menu
Description
• ATW: Auto tracking white balance allows the
camera to constantly adjust for optimal color
reproduction.
• AWB HOLD: Puts the ATW on hold and saves
the color settings.
• In MANUAL mode the Red, Green and Blue gain
can be manually set to a desired position
Adjust the speed of the white balance control
loop.
• ATW mode and AWB hold mode: adjusts the
Red gain to optimize the white point.
EN | 20