Werbung
Verfügbare Sprachen
Verfügbare Sprachen
1-2
Rack Installation Guide
#
To install the switch in the rack, perform the following tasks. The subsections that
follow include instructions for performing these tasks.
1.
Remove the doors from the rack, if necessary.
2.
Install the slide assembly.
3.
Install the switch assembly.
4.
Install the cable-management arm and route the cables.
5.
Replace the rack doors if you removed them.
10-32 x 1/2-inch screws (8)
slide assembly
switch
assembly
cable-management arm
tapered washers (8)
Werbung
