AEG Voxtel R200 Schnellstartanleitung Seite 5

3.2
• Slide the belt clip into the slot
as shown in Fig. 2.
>A "click" indicates the belt
clip is locked into its position.
3.3
Caution:
Observe the proper battery polarity orientation when installing
batteries. Incorrect positioning can damage both the batteries and
the unit.
• Slide down the battery compartment cover.
• Insert the rechargeable batteries by following the orientation as
shown in P3.
• Replace the battery compartment cover.
Important:
Read these safety warnings before you charge the batteries.
• Don't try to recharge non-rechargeable batteries.
• Make sure the battery compartment cover is securely locked in place
when you are charging the batteries.
• Dispose of used batteries safely and in a way that will not harm the
environment, never try to burn them or put them anywhere, they
could get burnt or punctured.
• Don't leave dead batteries in your PMR units. They might leak if you
do.
3.4
3.4.1
• Insert the small plug on the end of the mains adaptor into the power-
in connection jack at the back of the desktop charger.
AEG R200_V1.indd 5
Installing the belt clip
Installing the batteries (see P3)
Charging the batteries
With duo charger (model R210/R220) (see P4)
Belt clip latch
Fig. 1 Fig. 2
5
29/06/2012 21:43:30