Adjusting The Tonearm Height - Yamaha GT-5000 Bedienungsanleitung

„ Adjusting the tonearm height
If the tonearm and the record are not in parallel when you
lower the stylus onto the record, you will need to adjust
the tonearm height. Follow the steps below:
1
Return the tonearm to the arm rest and
set it securely in position
2
Use the hexagonal wrench to loosen
the VTA adjustment screw
VTA adjustment screw
NOTICE
The tonearm is secured by the VTA
adjustment screw. Before loosening the screw,
gently support the entire tonearm with your
hand so that it will not fall.
3
Move the tonearm up and down to
adjust its height so that the tonearm
and record will be in parallel
4
Use the hexagonal wrench to tighten
the VTA adjustment screw and secure
the tonearm
20