The Reset Button - Medion NAS 3 TB Bedienungsanleitung

The RESET button

11. The RESET button
The RESET button on the back of the NAS server is used to reset the NAS
server in case you have to reset the system or have lost your administrator
password.
You can press in the RESET button with a pointed object (a paper clip, for
example).
11.2.1. Resetting the administrator password
 To reset the administrator password to the standard password (user
name: admin; password 1234) hold down the RESET button for about 3
seconds until you hear a short beep.
You can now log on to the NAS server with the standard password.
11.2.2. Resetting the system to the standard settings
If the NAS server has a faulty response, or if settings that have been made
have caused you to lose your access to the system, it may be necessary to
reset the system to the standard settings.
 To reset the system, keep the RESET button pressed down for about 10
seconds. After 3 seconds you will hear a first short beep and a second
short beep after 10 seconds.
 Now release the RESET button. As confirmation you will hear three
short beeps. The system will now be reset to the standard settings and
restarted.
PLEASE NOTE!
Resetting the standard settings will also reset the administrator
password!
All data on the hard drive will be retained when resetting to the
standard setting! Only the system settings will be reset.
246 of 344