Hama AV-1200 AIR Bedienungsanleitung Seite 43

Record programs:
Power on the VCR / DVR with its remote controller and press REC key to record the AV program directly.
The VCR / DVR can only record the selected AV program on TV2.
LED Status: The GREEN LED 3 is on.
1-5. How to select the VCR source from the transmitter and record while viewing the programs on TV2?
Note:
The transmitter allows COMPOSITE signals input from the VCR source, and transmit the signal to the TV 2
on the receiver. The VCR on the receiver side thus can record the VCR source programs.
Operation:
1. Press POWER key to turn on the Receiver.
2. Power on the VCR:
you can turn it on with its own remote controller from receiver side and select favorite programs when
the RF transmission function is ON.
3. Press the VCR key under TV 2 region on the remote (or press the TV 2 source key on the front panel) into
VCR mode .
4. Use your VCR remote controller to operate.
Record programs:
Power on the VCR / DVR with its remote controller and press REC key to record the VCR / DVR programs
directly. Please note that the VCR / DVR can only record the selected VCR program on TV2.
LED Status: The GREEN LED 4 is on.
– 43 –