Yamaha WaveRunner GP1300R Wartungshandbuch Seite 460

– +
ELEC
INDICATION SYSTEM
Check engine warning indicator
1. Check:
• Check engine warning indicator
Does not operate → Replace the multi-
function meter.
Checking steps:
• Start the engine.
• Disconnect the coupler of a sensor (e.g.,
atmospheric pressure sensor) that nor-
mally activates the check engine warning
indicator when a malfunction occurs.
• Check that the warning light and check
engine warning indicator blink and that
the buzzer sounds intermittently.
Diagnostic display
1. Check:
• Diagnostic display
Does not display → Replace the multi-
function meter.
Checking steps:
• Start the engine.
• Disconnect the coupler of a sensor (e.g.,
atmospheric pressure sensor) that is nor-
mally displayed when a malfunction
occurs. Refer to "SELF-DIAGNOSIS" in
Chapter 9.
• Check that the check engine warning
indicator is displayed and that the buzzer
sounds.
• Press the select switch 1 for 8 seconds
and check if an error code is indicated on
the multifunction meter.
7-54
E