Herunterladen Inhalt Inhalt Diese Seite drucken

Kärcher VM R750 Gebrauchsanweisungenhandbuch Seite 62

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 93
In order to guarantee the perfect con-
servation of all engine components,
an "overseas" packaging should be
used in case of maritime transport.
The packaging contains all the infor-
mation needed to carry out the load-
ing and unloading operations.
During transport, make sure the load
is properly secured to the means of
transport to avoid unexpected dis-
placements.
When transporting the uncovered
engine by road, use the lifting points
provided to secure it steadily and
prevent components from being
damaged.
UNPACKING
Follow the procedure below.
1- Remove the cover of the packag-
ing. The packaging includes a bag
with all the relevant technical doc-
umentation and standard compo-
nents.
2 - While unpacking, make sure the
components are intact and their
quantity is correct.
3 - Place the lifting device as shown
GB
in the figure.
4 - Loosen the screws (A) and disas-
semble the side supports (B).
5 - Move the engine to the installation
area.
If necessary, keep the material in
case you need to pack the en-
gine in the future.
Important
In case of any damage or missing part,
contact the manufacturer's Assistance
Service to establish the procedure to be
adopted. The packaging material should
be suitably eliminated in compliance
with the applicable legislation.
English
screw (A)
support (B)
- 14 -
Handling and installation information
R750
IDM-45300600600.tif
IDM-45300600700.tif

Werbung

Kapitel

Inhaltsverzeichnis
loading

Inhaltsverzeichnis