Noise/Vibration Information; Declaration Of Conformity; Product Elements - Bosch GBH 36 V-LI Professional Bedienungsanleitung

gbh36v_bu_1619929686_t.fm Seite 2 Freitag, 17. März 2006 10:14 10

Noise/Vibration Information

Measured values determined according to EN 60745.
Typically, the A-weighted noise levels of the tool are:
Sound pressure level: 91 dB(A);
Sound power level: 102 dB(A).
Uncertainty K = 3 dB.
Wear ear protection!
Total vibration values (vector sum in the three axes)
determined according to EN 60745:
Hammer drilling in concrete: vibration emission value
2
a = 20 m/s , uncertainty K = 2 m/s
h
Chiselling: vibration emission value a
2
certainty K = 2 m/s
The vibration emission level given in
this information sheet has been
measured in accordance with a
standardized test given in EN 60745 and may be used
to compare one tool with another.
The vibration emission level will vary because of the
ways in which a power tool can be used and may in-
crease above the level given in this information sheet.
This could lead to a significant underestimate of expo-
sure when the tool is used regularly in such a way.
Note: To be accurate, an estimation of the level of ex-
posure to vibration experienced during a given period
of work should also take into account the times when
the tool is switched off and when it is running but not
actually doing the job. This may significantly reduce
the exposure level over the total working period.

Declaration of Conformity

We declare under our sole responsibility that this prod-
uct is in conformity with the following standards or
standardization documents:
EN 60745 according to the provisions of the directives
89/336/EEC, 98/37/EC.
Dr. Egbert Schneider
Senior Vice President
Engineering
Robert Bosch GmbH, Power Tools Division
1 619 929 686 • (06.03) T

Product Elements

Please open the foldout page with the illustration of the
machine and leave it open while you read these oper-
ating instructions.
The numbering of the machine elements refers to the
illustration of the machine on the graphic page.
1 Quick change keyless chuck (GBH 36 VF-LI)
2 SDS-plus quick change drill chuck (GBH 36 VF-LI)
3 Tool holder (SDS-plus)
4 Dust protection cap
2
2
= 13 m/s , un- 5 Locking sleeve
h
6 Quick change drill chuck locking ring
7 Right/Left rotation switch
8 On/Off switch with speed control function
9 Unlocking button
10 Operating mode selector switch
11 Battery unlocking button
12 Button on the auxiliary handle
13 Indicator for the temperature monitoring
14 Battery charged state indicator
15 Button for battery charged state indication
16 Rechargeable Battery*
17 Depth stop
18 Auxiliary handle
19 Screw for drill chuck*
20 Drill chuck*
21 SDS-plus adaptor for drill chuck*
22 Assembled drill chuck*
23 Drill chuck receptacle (GBH 36 VF-LI)
24 Front sleeve of the quick change keyless chuck
25 Holding ring of the quick change keyless chuck
Dr. Eckerhard Strötgen
Head of Product
Certification
26 Dust extraction attachment vacuum connection*
27 Clamping screw of the dust extraction
28 Depth stop of the dust extraction attachment*
29 Telescope tube of the dust extraction attachment*
30 Winged screw of the dust extraction attachment*
31 Guide tube of the dust extraction attachment*
32 Universal holder for screwdriver bits*
* Not all the accessories illustrated or described are in-
cluded in standard delivery.
English–2
(GBH 36 VF-LI)
(GBH 36 VF-LI)
(GBH 36 VF-LI)
attachment*