Dry Ironing - Grundig SIS 9450 Bedienungsanleitung

OPERATION ______________________________
Preparation
1 R emove all packaging materials, labels and
protective foil and dispose of them according
to the applicable legal regulations.
2
C lean the outer parts of the appliance as de-
scribed in the section "Cleaning and care".
3 P lace the appliance on an even, stable, dry
and non-slip surface.
4 P lace the iron onto the storage base
Notes
During first use, a slight odour may occur as
7
a result of manufacturing residues being burnt
off. This is harmless and will only last for a
short time. Ensure for sufficient ventilation.
Never immerse the steam iron station
7
water or any other liquid. Do not fill in the
steam iron station
C
agents, starch, perfume or ironing aids.
When ironing for the first time, use an old,
7
clean cloth so that manufacturing residues
can be removed from the soleplate
Dry Ironing
1
P lace the appliance on an even, dry and non-
slip surface. The non-slip feet
bility of the appliance.
2 N
T he water tank
the dry ironing process; otherwise steam pres-
sure could build up.
3 I nsert the power plug
4
P ush the On/Off switch
steam iron station
C
– The power indicator
steam indicator light blinks on low
24 ENGLISH
L .
in
C
with vinegar, descaling
M
.
W ensure the sta-
must remain empty during
B into the wall socket.
to switch on the
U
.
O lights up and the
.
T
5
D epending on the type of fabric, turn the tem-
perature control dial
settings:
Nylon / Silk •
Wool ••
Cotton •••
Linen max
Caution
Always read the care label on your garment
7
before setting the temperature.
– The temperature indicator light
The temperature indicator light
on while the iron is heating up. As soon
as the iron reaches the set temperature,
the temperature indicator light
The temperature indicator light
and off during usage to indicate that the set
temperature is being regulated.
6
T he ironing process can begin. Do not press
the steam button
I
Caution
When taking a break from ironing, always
7
place the iron back onto the storage base
L . The tip of the soleplate
placed on the surface of the storage base
7
A fter the ironing process is complete, place the
iron onto the storage base
down the On/Off switch
station for a few seconds to switch the steam
C
iron station off. Set the temperature control
C
dial to MIN and disconnect the plug from
K
the power outlet.
– The power indicator light
indicator light LOW
to one of the following
K
E lights up.
E remains
E goes off.
E will go on
during dry ironing.
M must always be
. Press and hold
L
of the steam iron
U
N and the steam
T go off.
L .