Preventing Equipment From Falling Over; Specifications - Pioneer KURO KRP-TS01 Bedienungsanleitung

Preventing Equipment from Falling Over

• After installing the stand, be sure to take special care to ensure that the equipment will not fall over.
• Secure the plasma television to both the rack and the wall surface.
Stabilizing on a rack etc.
Use screws (those available on the market) to fix the Pioneer
display and television like shown in the diagram.
To stabilize the equipment on
a table, use screws that have a
nominal diameter of  mm (/
inch) and that are at least 0 mm
(1/1 inch) long.

Specifications

External dimensions:
KRP-TS01 ............. 922 mm (W) × 222.4 mm (H) × 430 mm (D) (36-5/16 in. (W) × 8-3/4 in. (H) × 16-15/16 in. (D))
PDK-TS35A .......... 922 mm (W) × 298.9 mm (H) × 430 mm (D) (36-5/16 in. (W) × 11-25/32 in. (H) × 16-15/16 in. (D))
Weight:
KRP-TS01 ............. 5.8 kg (12.8 lbs)
PDK-TS35A .......... 6.0 kg (13.3 lbs)
• The above specifications and exterior may be modified without prior notice to improve the product.
Using a wall for stabilization
1
Attaching falling prevention bolts (hooks)
to the Pioneer display and television.
2
Using strong cords to firmly stabilize it
appropriately and firmly to a wall, pillar,
or other sturdy element.
Perform this work in the same way on the left and right
sides.
Use hooks, cords, and fittings that
are available on the market.
Recommended hook:
Nominal diameter M
Length 1 mm to 1 mm (1/ inch to / inch)
1
En