Assembling The Stand; Assembly Procedure - Pioneer KURO KRP-TS01 Bedienungsanleitung

Assembling the Stand

Assembly Procedure

1
Turn the base cover over so the underside is
facing up.
2
Insert the stand pipes into the base cover.
3
Tighten the screws ➀
to stabilize the stand pipes.
Assemble the stand with a soft sheet placed under the base
cover. If a sheet is not laid before assembly, the front surface
of the base cover may be scratched.
( mm × 10 mm: silver)
4
After assembling the stand, attach the falling
prevention metal fittings with the installation
screws ➂ (M ×  mm: black).
Be sure not to attach the falling prevention metal fittings in the
reverse position.
11
En