Siemens sitrans LR460 Schnellstartanleitung Seite 12

Programming SITRANS LR460
SITRANS LR460 only supports SIMATIC PDM version 6.0 with SP2 HF1 (or higher).
Note:
To set up SITRANS LR460 for a simple application requires only the following settings:
• select application type (silo construction)
• select operation mode: level, distance or space
• set speed of response
• set high and low calibration points
A Quick Start Wizard groups together all the settings you need. There are two ways to access
the wizard:
Quick Start Wizard via the handheld programmer
•
Quick Start Wizard via SIMATIC PDM
•
Activating SITRANS LR460
Notes:
• Keep infrared devices such as laptops, cell phones, and PDAs, away from
SITRANS LR460 to prevent inadvertent operation.
• Frequently switching the device off and on causes wear of the electronics. For details,
see the full manual.
Power up the instrument. SITRANS LR460 automatically starts up in RUN mode, and detects
the distance to the material level referenced from the sensor flange face. The LCD displays the
measurement and the default unit is meters. System status is displayed on the LCD, or on a
remote communications terminal.
RUN mode display
Normal operation
98.82
3.800 mA
mA value, HART only (press key 5 on
handheld programmer to activate)
Quick Start Wizard via the handheld programmer
Notes:
• The wizard is a complete package and the settings are inter-related.
• Do not use the Quick Start Wizard to modify individual parameters. See the full manual
for detailed instructions.
• Changes apply only after you select YES in parameter 1.8 (APPLY?).
The Quick Start menu appears as soon as you activate PROGRAM mode.
Page EN-10
reliable echo
level
indicator
units
m
SITRANS LR460 – QUICK START MANUAL
on page 10
on page 13
LOE condition
unreliable echo
indicator
flashing
heartbeat
98.82
S: 0
m
fault code
7ML19985QW82