Tips; Cleaning And Maintenance - Electrolux E4WMSTPN1 Handbuch

7. TIPS

1. The more the water applied on the stain, the more efficient the process.
2. By changing the position of the paper towel or cloth the stain will be absorbed
more efficiently.
3. Add detergent whenever necessary for persistent stains.
The difficulty in removing a stain will vary depending on the type of fabric,
how long the stain has been allowed to set, temperature, pigmentation and
other factors.
Removal efficiency can be affected by factors that include the presence
of water; mechanical action; chemical action; temperature and time.
Each of these factors can help to make the process more effective, and some
stains will be more responsive to one factor than to others. For example,
pigmented soilings (fruit, wine, etc.) are more easily removed with chemicals
such as bleaches e.g. stain removal additives), while greasy (Butter, chocolate,
etc.) and particulate (grease, mineral oil, dust, etc.) soilings are more easily
removed by a combination of mechanical action and heat. The Stain Remover Pen
operates as a purely mechanical agent, using water as a medium to impart energy.
Adding water in generous amounts and a colourless or neutral liquid detergent,
and applying the wand for a sufficient amount of time on the fabric, are essential
for effective stain removal.
Best results are achieved on:
• Fresh stains that have not completely set.
• Stains that have been previously washed but not dried in a dryer or ironed.
• Small stains confined to a small area of the garment.
Less efficient on:
• Set-in or old stains.
• Stains that have been previously washed and dried in a dryer or ironed.
• Large stains, spread across a large area of the garment.

8. CLEANING AND MAINTENANCE

Quick cleaning instructions:
1. Disconnect the connector from the Stain Remover Pen.
2. Dry the cup and the base if it has been filled with water.
3. Clean the tip with a damp cloth.
4. Sto the Pen in its cradle and wind the power cord into a coil.
5. Store the unit in a dry and well-ventilated area.
NOTE: Never use abrasives, alcohol, solvents or any other chemicals to clean
the unit.
7