Display - Sony WRR-802A Bedienungsanleitung

Location of Parts and Controls
6 – button
To go to a lower group or channel, press this button while
holding the GP or CH button.

7 Display

Displays the status of this unit and the groups and channels
assigned to the unit.
For details, see the following section "Display".
8 VOL. (volume) control
Adjusts the volume of the tuner output.
Display
AF BATT
RF
GP CH
6 GB
1 AF indicator
2 AF level indications
3 BATT indicator
4 BATT indication
5 GP/CH indication
6 RF level indications
7 RF indicator
1 AF (audio frequency) indicator
2 AF (audio frequency) level indications
The indicator lights and the indications appear when the
audio output level is higher than the reference level.
3 BATT (battery) indicator
4 BATT (battery) indication
Indicate the condition of the wireless microphone transmitter
batteries. The indicator and indication appear and start
flashing about one hour before the transmitter batteries go
flat. The time at which flashing begins will depend on the
type of battery used in the transmitter, and its condition.
5 GP/CH (group/channel) indication
Shows the reception channel group and respective channel
number.
Pressing the + button changes this indication to the frequency
indication.
6 RF (radio frequency) level indications
7 RF (radio frequency) indicator
The indicator lights and the indications (dots) appear when
the antenna reception is optimal. Depending on the RF input
level, the number of dots changes.