WARNING DEVICE
Safety
Only the following sensors must be connected to the warning device:
Description
Overflow sensor for detecting excessively high fluid level
Layer thickness sensor for detecting thickness of oil layer
Sludge layer sensor for detecting sludge layers
1.4.1
Coding
Warning device
Pepperl+Fuchs GmbH
68301 Mannheim/Germany
LAL-SRW
DEMKO 07 ATEX 142587
II (1)G [Ex ia] IIB
1.5
Maintenance
The device must not be cleaned with caustic fluids.
The devices are maintenance-free. However, to guarantee perfect operation of the complete
alarm system, check the operation, including all sensors, at least once a year.
1.6
Delivery, Transport and Storage
Check the packaging and contents for damage. In the event of damage, notify the postal
service or express agent and inform the supplier.
Check the scope of supply for completeness and correctness using the order and delivery
papers.
Keep the original packaging.
The device should always be stored or transported in the original packaging.
Always store the device in a dry and clean environment. Observe the permissible storage
temperature (see data sheet).
Type code
NVF-104/34-PF
KVF-104-PF
SLU-103-**
EN - 5
EN