Technical Data; Rating Plate - AEG HC652601EB Benutzerinformation

7. Loosely screw in the fixing plates
from below to the worktop and to
the connection bar.
8. Insert next hob into the worktop
cutout. Make sure that the front
edges of the hobs are on the same
level.

9. TECHNICAL DATA

9.1 Rating plate

Model HC652601EB
Typ 56 TEP 01 AU
Induction 5.6 kW
Ser.Nr. .................
AEG
9.2 Roasting zones specification
Roasting zone
Front
Rear
The power of the roasting zones can be
different in some small range from the
data in the table. It changes with the
9. Tighten the fixing plates / retaining
grip screws.
10. Use silicone to seal the gaps
between the hobs and between the
hobs and the worktop.
11. Put some soapy water on the
silicone.
12. Press the rubber shape with some
strength against the glass ceramic
and move it slowly along the space.
13. Do not touch the silicone until it
becomes hard, it can last about a
day.
14. Carefully remove the silicone that
came out with a shaving blade.
15. Clean the glass surface.
PNC 949 595 446 01
220 - 240 V 50 - 60 Hz
Made in Germany
5.6 kW
Nominal power (maximum heat setting)
[W]
2800
2800
material and dimensions of the
cookware.
ENGLISH 19