Siemens SINVERT PVM10 Kompaktbetriebsanleitung Seite 28

6 Operator input
The waveform of data such as the infeed power can be represented with the 128 x 64-pixel graphics display integrated on
the front. The necessary parameters are selected and entered using the 8-key operator panel.
READY ON
Analysis
Actual values
Fault memory
Configuration
Device information
F1-Menue
F1
ESC
Status display
Designation
READY
ON
ALARM
GROUND FLT
Input keys
Designation
F1
F2
ESC
ENTER
26
SINVERT
ALARM GROUND FLT
F2
ENTER
Description
LED flashing:
LED is lit:
LED flashing:
LED is lit:
LED flashes red:
LED lit red:
LED lit
Description
Calling up the device menu
Select entry of normalized energy data
Selection
Function in the menu: Jump to first or last menu item
Function on parameter change:
Position left, position right (skip screen)
Acknowledgment of an alarm, deletion of an input, jump up one level
Confirmation of a selection or entry
Initialization
Initialization of the device completed;
inverter not yet switched in;
inverter not yet supplying power.
Switching in the inverter
Infeed operation
Transient fault. Error message saved in the fault memory, safe from
power failure
Fault: Alarm message saved in the fault memory, safe from power
failure.
Insulation value in the PV array too low.
SINVERT PVM
A5E02758224B/007, 01/2013