Grundig FineArts MR 8000 Bedienungsanleitung Seite 13

SETTINGS _ _ ____________________________
Setting_Up_Speakers_for_
DDMS
DDMS can be setup in two modes:
Stand-Alone_(SA)_Mode:
network of devices connected together to
form a group.
Home-Network_ (HN)_ Mode:
or more devices connected to an Access
Point (AP) to form a group.
Setting_Up_Stand-Alone_
Mode
1_ T urn ON the first device and trigger SA-
Mode Master, by long pressing on (3
sec.) SA button. Observe the
blinks at fast speed. After successful con-
figuration, SA_LED_lights up continously.
Note:__
Speaker enters SA-Mode and is config-
ured as Master.
2 Turn ON the second device and trig-
ger SA-Mode Slave, by single pressing
on SA_ button. Observe the
blinks at normal speed. After successful
configuration, SA_LED
nously.
_
3 2
Repeat Step
Peer-to-Peer
SA_LED
SA_ LED
lights up conti-
for other devices.
Note:__
First speaker must be configured as Mas-
ter and other speakers must be config-
ured as Slave.
Setting_Up_Home-Network_
Mode
Configure_ Speakers_ Over_ Wi-Fi_
Two
-_Using_SAC_Method_on_Android_
Devices
1
Connect the Android device with
Grundig App, to the Home-AP.
2 Turn ON the speakers, and trigger
SAC by single pressing on
ton. Observe the
normal speed.
HN but-
HN_LED blinks at
ENGLISH 13