Grundig FineArts MR 8000 Bedienungsanleitung Seite 10

REMOTE_CONTROL _ ____________________
Remote_Control_Operation
Insert the batteries into the remote
control. Point the remote control at the
remote sensor on the front panel. The
remote control works within a distance
of about 8 metres from the sensor and
within an angle of about 30 degrees
from the left and right side.
Battery_Installation
1 Remove the battery compartment
cover on the back of the remote control.
2 Load one AAA/1.5V battery into the
battery compartment making sure that
the battery have been inserted with the
correct polarities matching the symbols
+, - as indicated inside the battery co
partment.
10 ENGLISH
3 Replace the cover.
Notes:
Remove the battery when you do
not intend to use the remote con-
trol for a long time.
Weak batteries can leak and se-
_
█
verely damage the remote control.
The battery must not be exposed to
█ _
excessive heat source, such as sun-
shine, fire or any other things like
that.
Be environmentally friendly and dis-
█ _
pose of batteries according to your
government regulations.