♦
Confirm your selection by pressing the dial 9 .
♦
Set the quantity (g/ml) using the dial 9 and confirm your entry by pressing
the dial 9 . The cooking process starts . The preset time for the automatic
programme appears on the display 5 . The time starts counting down .
NOTE
►
To ensure uniform cooking, some foods should be mixed or turned after
around two thirds of the cooking time . Cooking pauses automatically at this
time,
If required, turn or mix the food and then press the dial 9 to resume
cooking .
If you do not want to turn the food, simply resume
dial 9 .
♦
Once the set time has elapsed, "End" appears on the display 5 and you
will hear four beeps . Press the stop button q
appliance so that it switches back into standby mode .
If you do nothing, there will be a further four beeps every two minutes .
NOTE
►
The values given in the table are rough guideline values . The cooking result
will vary depending on the size, shape and sort of food being cooked .
Application example 1:
To heat 200 ml of water, proceed as follows:
♦
Turn the dial 9 left (towards
and confirm your choice by pressing the dial 9 .
♦
Use the dial 9 to set the quantity "200 ml" .
♦
Press the dial 9 to start cooking .
Application example 2:
To cook 400 g of vegetables, proceed as follows:
♦
Turn the dial 9 left (towards
and confirm your choice by pressing the dial 9 .
♦
Use the dial 9 to set the weight "400 g" .
♦
Press the dial 9 to start cooking .
■
50
│
GB │ IE
you will hear four beeps and the time display
flashes .
cooking by pressing the
or open the door of the
) until "A-01" appears on the display 5
) until "A-07" appears on the display 5
SMWC 700 A1